時間：2015-05-06 11:22來源：藍天飛行翻譯公司 作者：航空翻譯
|
道通行 manual segment straight torque directive compliance 飛行演練 絕緣差 絕緣承壓 step iv Leakage per step iv may not exceed .5 psig. Isolate and repair any leaks by using a bubble leak detection solution of the fittings. If there is any doubt if leakage exists, check all of the fittings with a bubble solution an Leakage per step iv may not exceed .5 psig. Isolate and repair any leaks by using a bubble leak detection solution of the fittings. If there is any doubt if leakage exists, check all of the fittings with a bubble solution and repair. Type and Siz Type and Size alignment stripe 地帶】 khots kpm Corrected Test Pressure = Initial Test Pressure + Ambient Temperature + Ambient Pressure Correction. sqart 各個環(huán)節(jié) messege FLAT PANET HUD combiner wheel MLG TYIR Allow the system to set for one hour. Record the test pressure and the ambient pressure in the same manner as above. 特情處置方案 所在位置 飛機頻率 caution level molybdemum True ambient pressure can be found by setting the altimeter to zero and reading the pressure in the window of the altimeter. FICD vdpt Package Removal 圖像對接 EIC AS Perspex template lightning diverter strip bufferedwraparound STNLS around the clock Replenish the Engine 煙柳 Drift in timing Drift timing Drift in Magneto-to-Engine 空地臨近電門 監(jiān)察城西 Allow the system to stabilize for ten minutes. Tap the test gage and record the exact test pressure. Record the ambient temperature in °F and true ambient pressure in inches of mercury. pressure raising valve hand pressure gun 指揮和控制站 撤離方法 initia; landed Resp landing Resp messier bugatti |
